Traffic Management System
Extends up to 6 Metres (Click image to enlarge)
Full Kit (Click image to enlarge)
The Height Barriers for Overhead Cable Protection were created to fill a gap in the market for poles that are lightweight, affordable and easily transportable.
The system itself is comprised of two fibreglass telescopic poles which reach any size up to 6 metres when extended. These are poles are non-conductive and should be placed either side of the road of the designated area. The Poles operate by means of a quick release, hand controlled clamping system and all components of the Pole can be maintained and replaced easily should the need arise.
The kit also contains two heavy duty steel bases which weigh 13.5kg each. The bases themselves have drill holes so that they can be easily screwed and secured into the ground without the use of sandbags, if ground conditions commit this procedure. However, sandbags could be used and would always be recommended as extra protection. The bases can be disassembled for ease of transport and storage.
We also offer an “Own Branding” service. This allows you to have your brand name or logo on the posts themselves.
- HSE GS6 Compliant
- Collapsed Pole Length: 171.4
- Extended Pole Length: 6 Metres
- Base Section OD: 42mm
- No of Sections (per Pole): 6
- Pole Weight: 5kg
- Safe non-electrically conductive material of construction
- All Clamps are hand controlled and adjustable without extra tooling
- High Visibility GS6 Compliant Red and White
- Alternating Sections
- Solid Steel Base Weight: 13.5KG (each)
- Base Plate Dimensions = 50cm x 50cm
- Securing Tube Height: 50cm
- Total Weight (Both Poles and Bases): 37kg
- Separates for Easy Storage and Transport
- Screw hole in the base makes it easy to secure
- All able to assemble without the use of tools
- A: Y Piece Collar to attach bunting
- B: Strong quick release clamps. Makes extending and collapsing easy and effortless.
- C: Steel Base is easy to assemble and keeps your barriers upright and secure.
Assembling the Height Barriers
· Firstly, assemble the Steel base by ensuring the locking collar is screwed onto the tube to the height of the thread and then screw the thread down onto the base using the locking nut.
· Place the Steel base in position i.e. on one side of the road
NOTE: For best results, ALWAYS weigh down the base with 2 x 20KG sandbags OR use the drill hole to screw the base down
· Once the base is assembled correctly, drop the collapsed telescopic pole into the Vertical Base tube
Once the pole is secured into the Steel base, before the pole is erected, the bunting can be applied to the first goal post
· Next, firstly open the top clamp, extending fully and work your way down from the top until you reach the base.
· Once the first goal post is set up, follow the procedure once more for the second goal post
· Place the second goal post on the other side of the danger area i.e. across the road, on level with the first
· Once set up, your goal posts will prevent any vehicles OVER the permitted height from entering the danger area.
Guarantees and Warranties
All of the Height Barrier Kits are covered under an extensive Guarantee for a period of 12 months. This will cover the user for Manufacturing faults or defective workmanship. It will also cover, within the first 12 months, any accidental damage done whilst in use. We reserve the right to review accidental damage if operating procedures are in question. The Guarantee does not cover Wear and Tear or Environmental Erosion.